Mopar Unveils Logo, Special Product Line and Plans Marketing Events
- 2014 marks 50th anniversary of the introduction of the Gen II 426 Race HEMI®
- Mopar unveils 50th anniversary HEMI logo celebrating the iconic engine
- Engine made its legendary debut in February 1964 by dominating the Daytona 500
- A version of the Gen II 426 HEMI still powers NHRA Funny Car and Top Fuel vehicles
- Special 50th anniversary HEMI merchandise product line available on WearMopar.com
- Marketing events planned for fans throughout the year
To kick off the year-long commemoration of the legendary engine, Mopar has created a 50th anniversary logo. The design incorporates an elephant in reference to the engine’s moniker, which resulted from the powerplant’s imposing size, strength and power. The logo also features the trademark HEMI-orange color that covered the engine and made it even more recognizable.
“Mopar is proud to mark the 50th anniversary of the introduction of the Gen II 426 HEMI, a revolutionary engine that inspired a long line of quality products in our brand’s portfolio,” said Pietro Gorlier, President and CEO — Mopar, Chrysler Group LLC’s service, parts and customer-care brand. “The 426 HEMI is such a vital part of our heritage and a key ingredient in helping make Mopar what it is today. The success of the Race HEMI launched a unique brand of sought after muscle cars that had fans began to refer to as Mopars, and that is something we are very proud of.”
While Chrysler engineers initially introduced the original hemispherical combustion engine design for passenger cars in 1951 and celebrated its 60th anniversary in 2011, the iconic and revolutionary second generation HEMI engine, so closely associated with the muscle car era, made its memorable debut in 1964.
The new second generation HEMI measured 426 cubic inches and was built specifically to win races. Two versions of this 426 race engine were built – one called the “Circuit” or “Track” engine and the other the “Acceleration” or “Drag” engine.
The Gen II 426 Race HEMI was first introduced at the Daytona 500 in February 1964 with legendary driver Richard Petty winning the race handily in his Plymouth, while a dominating performance by three other HEMI-powered entries gave four of the top five finishing positions to the new powerplant. Petty drove to eight victories and earned the NASCAR championship in 1964 with HEMI-powered cars amassing a total of 26 race wins. The HEMI used for the season was rated at 400 horsepower and had a compression ratio of 12.5:1.
That same year in National Hot Rod Association (NHRA) drag racing competition, Don Garlits broke the 200-mph barrier in the Gen II 426 Race HEMI-powered car travelling the quarter-mile straight-line distance in 7.78 seconds at 201.34 mph.
For the following season, NASCAR’s sanctioning body changed the rules mandating that all engines used for its races must be available in production vehicles. This led to the withdrawal from NASCAR competition for the 1965 season and saw Chrysler engineers concentrate their efforts in drag racing.
A new lighter drag racing package, referred to as A-990, debuted in the NHRA Super Stock class in 1965 in Dodge and Plymouth vehicles with altered wheelbases, launching the popularity of Funny Cars. To this day, a version of that engine still powers every single Funny Car and Top Fuel engine regardless of being badged by other manufacturers.
With the introduction of the 426 “Street” HEMI in 1966 for production vehicles, the HEMI made a return to NASCAR racing. During the next several years, vehicles with HEMI engines won countless races, numerous championships in various professional categories and were feared by competitors.
With the availability of a Street HEMI, Chrysler no longer offered a special drag racing engine. Instead, drag racers were provided with the street version, which they could modify at their discretion. The only exception was the limited edition 1968 Dodge Dart and Plymouth Barracudas that remained powered by the 426 Race HEMI, with only 75 of each model produced.
The heritage of those special vehicles is celebrated each year by Mopar with the HEMI Challenge that takes place in the Sportsman class at the NHRA’s prestigious U.S. Nationals in Indianapolis. The HEMI Challenge made its debut in 2001 and features these classic muscle cars, which contributed to the brand’s legendary reputation and success at the drag strip.
In anticipation of the 50th anniversary of the 426 Race HEMI engine, Mopar also established the “Tom Hoover Sportsman Challenge” at the start of the 2013 season, with a winner selected from the Sportsman Stock or Super Stock classes by amassing the most points at the wheel of a Chrysler Group vehicle in the course of a season during NHRA sanctioned races nationwide.
Since its1964 debut, the second generation Gen II 426 HEMI remains a legend due to its reputation and performance on and away from the racetrack, the dedication and skill that Chrysler designers put into it, as well as its rarity since availability was discontinued in production vehicles in 1971.
The innovative engine’s offspring live on, not only in the NHRA within all Funny Car and Top Fuel machines, but also within both new production and classic heritage vehicles thanks to the availability of current day products (including the installation of a crate engine), to transform them into a “Mopar”-machines.
To mark the 50th anniversary celebration, and complement the availability and continued development of these engines, a unique product line of HEMI merchandise has been created and will be launched throughout the month of January at WearMopar.com. This new product line features the HEMI 50th anniversary logo and will include items such as clothing, decorative lighting, clocks, a pub table, stools, and much more.
Numerous marketing initiatives and events surrounding the 50th anniversary, designed to encourage Mopar fans to partake in the celebrations nationwide, are also planned for 2014 and will be announced shortly.
3 thoughts on “2014 Marks 50th Anniversary of the Iconic 426 HEMI”
Love to hear the news good luck! If you need a volunteer to put one in an 06 Magnum, I’d be honored!
You guys need to make a new 426 Hemi! The 6.4 392 Hemi is bad ass and I hope you guys make a 426 Hemi very soon. My dad has the SRT-8 6.4 392 challenger and SRT-10 viper truck so I know if you ce out with a 426 Hemi he be one to buy it. We are a huge Dodge family. I also have a 5.7 Ram 1500. We just hope you guys make something that will make any Chevy or ford be scared. Keep up the fantastic job!!!
I Hope that the new announcement and to celebrate the 50th anniversary, That y’all will put a 680 HP Hemi Hellcats engine in the new 2015 Dodge Challenger.
I for one my sick of hearing about Chevy and Ford doing all kind of stuff. It’s time for us to kick some Ford and Chevy ass!
Comments are closed.